If the dryer is that two or three hours to get a load of laundry, which normally see in a dry now dry, although we are able to determine what the problem is.
The first thing you need to check and verify that global warming is drying.
Set the dryer can be in the regular cycle in time and turn it on, run it for about 5 minutes, open the oven door and check to see if he warms up.
If the heating is ok the next thing to check is to see if the glass foldsthe dryer. Set the timer on the regular cycle to dry weather, open the door of the press dryer and keep the door a. Press the start button and move the dryer look inside to see if the glass is dropped or not.
If the belt breaks and the cup is not the dryer, the clothes are dry. If the cup falls ok, check the vent pipe to make sure it is not clogged with lint.
Turn the dryer inside, without clothes and go out of control and the discharge pipe fromon the outside of the house. It should be a good amount of air exhausting to the outside. If the airflow is a bit 'out to see if there is nothing blocking the air.
If it seems ok at this point, enter the house and remove the vent pipe behind the machine. Verify the airflow from the dryer must be strong if it is strong, the problem must be in the exhaust pipe.
This could be nothing, a knot in the tube and I saw even when theHanging pipe and turn into a horseshoe, the water in the hose restricting the flow of air.
Mention if everything works well, then the problem could thermostats, resistors, switches, etc.
Before you take the dryer apart, because it takes too long to decide to dry their clothes, make sure that your problem is not an obstacle in the exhaust pipe.
Electricity can be dangerous if not careful when working or testing an electrical appliance. Be sure to separateDryer first you do not work on it.